VT-PTZ12WH
19
3.1 Power on and Boot-up Sequence
When the power is applied to the dome camera, it will start the boot-up sequence.
When boot-up is done, the following information is displayed on the monitor screen.
On Screen Display in normal control mode
RAM TEST
CHECK NO. : OK!
CHECK AAAA : OK!
CHECK 5555 : OK!
XPRESS DOME Vx.xxx
ID:0001 9600BPS AUTO
CAMERA TYPE xxxx
TILT ORIGIN SET OK
PAN ORIGIN SET OK
INITIAL CAMERA OK
001PRESET W
→
EMPTY DATA !
ALARM:1
360.0,090.0 CAM xxxx
Preset
No.
Information
Alarm Display
Dome Camera Title
Dome Camera ID
Compass Direction
Pan & Tilt Angle
Preset Title
Or
Area
Title
