Vitek VT-8525, Manual Instruction

Page: 3 / 40

3
ENGLISH
BLENDER SET VT-8525
The blender is included into the blender set and
intended for whisking, mixing, chopping and
combined processing of liquid and solid prod-
ucts.
DESCRIPTION
1.
Detachable blender attachment
2.
Motor unit
3.
On button «I»
3а. On button «II»
4.
Rotation speed control knob
5.
Chopper geared lid
6.
Chopper bowl
7.
Chopping knife
8.
Whisk attachment gear
9.
Whisk attachment
10.
Measuring cup
ATTENTION!
For additional protection it is reasonable to install
a residual current device (RCD) with nominal oper-
ation current not exceeding 30 mA. To install an
RCD contact a specialist.
SAFETY MEASURES
Before using the unit, read this instruction manual
carefully and keep it for future reference. Use the
unit for intended purposes only, as specified in this
manual.
Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/her
property.
• Before connecting the unit to the mains, make
sure that the voltage specified on the unit corre-
sponds to your home mains voltage.
• Never leave the unit connected to the mains
unattended.
•
Always unplug the unit before changing the
attachments and after using it.
•
Before using the unit, make sure that the attach-
ments are set and fixed properly.
• Do not connect the motor unit to the mains if the
attachments are not installed.
• It is not allowed to switch the unit on without
attachments and foodstuffs for processing.
•
Do not use the unit outdoors.
• Cool down hot products before putting
them into the measuring cup or the chopper
bowl.
• Do not place the chopper bowl and the measur-
ing cup into a microwave oven.
•
Use only the attachments supplied with the unit.
• Before using the unit for the first time, thor-
oughly wash all the removable attachments and
containers that will contact food.
• Place the chopper bowl on a flat stable surface.
•
Products should be put into the chopper bowl
before the unit is switched on.
• Do not overfill the chopper bowl with food and
watch the level of poured liquids.
• The cutting edges of the chopping knife and of
the blender attachment are very sharp and dan-
gerous. Handle these attachments very carefully!
• If rotation of the chopping knife is hindered dur-
ing the operation of the chopper, unplug the
unit and carefully remove products that prevent
blade rotation.
•
Remove products and pour out liquids from the
chopper bowl only after complete stop of the
chopping knife.
•
Do not touch the rotating parts of the unit. Do
not let hair or free hanging clothes get into the
rotation area of the blender attachment knife
or whisk.
• Unplug the unit every time before cleaning or
when you are not using it.
• Unplug the unit by taking the power plug directly.
• Do not pull the power cord and do not twist it.
•
Do not put the attachments and the bowls in
a dishwashing machine.
•
Do not use the unit near hot surfaces (such
as gas or electric stove, oven).
• Provide that the power cord does not touch
sharp edges of furniture and hot surfaces.
• Do not touch the motor unit body, the power
cord and the plug with wet hands.
•
To avoid risk of electric shock or fire, do not
immerse the unit body, the power cord and the
power plug into water or any other liquids.
•
If the unit is dropped into water:
–
do not touch the water;
–
unplug the unit immediately, only after that
you may take the unit out of water;
–
apply to the authorized service center for
testing or repairing the unit.
• For children safety reasons do not leave poly-
ethylene bags used as a packaging unattended.
Attention! Do not allow children to play with poly-
ethylene bags or packaging film. Danger of suf-
focation!
• Do not allow children to touch the body of the
motor unit, the power cord or the power plug
during operation of the unit.
IM VT-8525.indd 3 07.02.2018 9:40:15