Vitek VT-8213 PK, Instruction Manual

Page: 7 / 44

7
ENGLISH
– You may wipe the unit body (2) with a damp cloth and
then wipe it dry.
– Clean the air inlet grid (4) with a brush.
– Never immerse the unit into water or other liquids.
– Do not use abrasives and solvents to clean the unit
body.
STORAGE
– Unplug the hair dryer if you are not using it.
–
Let the hair dryer cool down after its usage, keep the
unit away from children in a dry cool place.
– Never wind the power cord around the hairdryer, as
this can damage the cord. Handle the power cord with
care, do not pull, twist or stretch it, especially near
the power plug or at the junction point. Straighten the
cord periodically if it gets twisted.
– For easy storing there is a hanging loop (6), you can
hang the unit on this loop provided that no water gets
on the unit in this position; you can fold the handle (5)
to minimize the hairdryer size.
DELIVERY SET
Hairdryer – 1 pc.
Nozzle attachment – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V, ~ 50/60 Hz
Rated input power: 1400-1600 W
Do not use the unit while taking a bath.
Do not hang or keep the unit in places where it can fall
into a bath or a sink filled with water; do not immerse
the unit body, power cord or power plug into water or
other liquids.
The manufacturer preserves the right to change the
specifications of the units without a preliminary notification
IM VT-8213_70x130.indd 7 08.12.2017 16:02:01