Vitek VT-8213 PK, Instruction Manual

Page: 3 / 44

3
ENGLISH
HAIR DRYER VT-8213 PK
The hair dryer is intended for hair drying and styling.
DESCRIPTION
1.
Operation mode switch ( 0\1\2 )
2.
Body
3.
Nozzle
4.
Air inlet grid
5.
Foldable hairdryer handle
6.
Hanging loop
ATTENTION!
–
After using the hair dryer in a bathroom, disconnect
the power plug from the mains socket, as water close-
ness is dangerous even if the unit is switched off.
– For additional protection you can install a residual cur-
rent device (RCD) with nominal operation current not
exceeding 30 mA into the bathroom mains; contact a
specialist for installation.
SAFETY MEASURES
Before using the unit, read this manual carefully and keep
it for future reference.
Use the unit for intended purposes only, as specified in
this manual. Mishandling the unit can lead to its break-
age and cause harm to the user or damage to his/her
property.
•
Before switching the hair dryer on, make sure that
your home mains voltage corresponds to the unit
operating voltage.
•
Do not use the unit outdoors.
•
To avoid fire, do not use adapters for connecting the
unit to the mains.
•
Use only the attachment supplied with the unit.
• When using the unit, we recommend to unwind the
power cord to its full length.
•
The power cord should not:
–
touch hot objects,
– run over sharp edges,
– be used for carrying the unit.
IM VT-8213_70x130.indd 3 08.12.2017 16:02:01