Vitek VT-8213 PK, Instruction Manual

Page: 4 / 44

4
ENGLISH
•
Check the power cord and power plug insulation
integrity periodically.
•
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Hair spray shall be applied only after hair styling is
finished.
•
Do not operate the unit while taking a bath.
•
Never leave the operating unit unattended.
• Do not touch the unit body, the power cord and power
plug with wet hands.
•
Take the switched on hair dryer by its handle only.
•
Do not place and do not keep the unit in places, where
it can fall into a bath or a sink filled with water, do not
immerse the unit into water or other liquids.
•
If the unit is dropped into water, unplug it immediately,
and only then take it out of the water.
•
Do not use the unit when you are drowsy.
•
Do not use the unit to style wet hair or synthetic wigs.
•
Avoid contact of heated surfaces with your face, neck
and other parts of your body.
• Do not drop the unit.
•
Do not put the operating unit on heat-sensitive or soft
surfaces (for instance, bed or sofa) and do not cover it.
•
Do not direct hot air into your eyes or other heat-sen-
sitive parts of your body.
•
The concentrator nozzle gets hot during operation.
Allow the attachment to cool down before removal.
•
Never insert any foreign objects into any unit body
openings.
•
Never block the air inlets of the hairdryer, do not place
it on a soft surface (a bed or sofa), where the air inlets
may be blocked. Keep the air inlets free of lint, dust
and hair etc.
•
Avoid getting of hair into the air inlet grid during opera-
tion of the unit.
•
Clean the unit regularly.
•
Unplug the unit after every usage and before cleaning.
•
When unplugging the unit, pull the power plug but not
the power cord.
•
For children safety reasons do not leave polyethylene
bags used as packaging unattended.
IM VT-8213_70x130.indd 4 08.12.2017 16:02:01