English
9
Pre button ALARM for more then seconds to set alarm time.
Alarm hours digits
start blinking.
Use buttons
«
▼
/
▲
» to set alarm hours digits. Press button ALARM
for confirmation. Alarm minutes digits start blinking.
Use buttons
«
▼
/
▲
» to set
alarm minutes digits. Press button ALARM for confirmation.
Alarm sound signal repeat
Alarm signal could be switched off for 10 minutes by pressing button SNOOZE/
LIGHT. Symbols «Zz» are displayed on LCD. After 10 minutes alarm signal will be
repeated. Press ALARM button to switch alarm off.
Switching backlight off
Set switcher Backlight into position ON/OFF or press button SNOOZE/LIGHT
(for short LCD backlight) to put on/off LCD backlight.
Set switcher Light Bar into position ON/OFF to put on/off device backlight.
Notice: Continuous LCD backlight, and continuous projection of time is possible
only in case of connection to external power source through AC adapter.
Image projection
Turn projector in direction you need for time projection. Switch projector on by
setting switcher PROJECTION into position ON (for continuous projection of
time) or press button SNOOZE/LIGHT (for short projection of time).
Turn FOCUS control to adjust focusing of an image. Use IMAGE ROTATION con-
trol to turn an image.
Set switcher PROJECTION into position OFF to turn off projection mode.
Notice: Continuous projection of time is possible only in case of connection to
external power source through AC adapter
6402IM.indd 9
11.04.2008 16:37:17
