Vitek VT-3619, Manual Instruction

Page: 3 / 24

3
ENGLISH
MEAT GRINDER VT-3619
The meat grinder is intended for processing prod-
ucts and making homemade semi-finished products.
DESCRIPTION
1.
Pusher
2.
Food tray
3.
Meat grinder head body
4.
Meat grinder head installation place
5.
Meat grinder head lock button
6.
Meat grinder body
7.
Operation mode switch (ON/0/R)
8.
Screw
9.
Crossed blade
10.
Cutting plate
11.
Meat grinder head nut
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal opera-
tion current not exceeding 30 mA. To install the
RCD contact a specialist.
SAFETY PRECAUTIONS
Read this instruction manual carefully before using
the unit and keep it for the whole unit operation
period. Mishandling of the unit may lead to its
breakage and cause harm to the user or damage to
his/her property.
To reduce the risk of fire, to prevent electric shock
and to avoid other injuries, it is necessary to observe
the following safety measures when using the elec-
tric meat grinder:
•
Before switching the unit on for the first time,
make sure that the voltage in your mains corre-
sponds to the operating voltage of the unit.
•
Use only the accessories supplied with the unit.
•
To avoid electric shock, NEVER IMMERSE the
unit, the power cord and the power plug into
water or any other liquids.
•
Use a slightly damp cloth to clean the meat
grinder body and then wipe it dry.
•
Never leave the operating meat grinder unat-
tended.
•
Always switch the meat grinder off and unplug it
before assembling, disassembling and cleaning.
•
Place the unit on a flat steady surface away from
heat sources, open flame, moisture and direct
sunlight.
•
Do not set the unit on a hot surface or next to it
(for instance, near a gas or electric stove, near
a heated oven or a cooking surface).
•
Handle the power cord with care, prevent it from
multiple twisting and straighten it periodically.
•
Do not use the power cord for carrying the meat
grinder.
•
Do not let the power cord hang from the edge
of a table, and make sure that the cord does
not touch sharp furniture edges and hot sur-
faces.
•
When unplugging the unit, hold the power plug
but not the cord.
•
Do not connect, disconnect or touch the power
cord with wet hands, this may cause electric
shock.
•
This unit is not intended for usage by children.
•
During operation and breaks between operation
cycles, the unit should be placed out of reach
of children.
•
Do not allow children to touch the unit and the
power cord during the unit operation.
•
The unit is not intended to be used by persons
(including children) with any physical, sensory
or mental disabilities or by persons lacking life
experience or knowledge if they are not under
supervision of a person responsible for their
safety or if they are not instructed by this person
on the usage of the unit.
•
Do not leave children unattended to avoid them
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
•
Do not use the unit if the power plug or the
power cord is damaged.
•
If the power cord is damaged, it should be
replaced by the manufacturer, a maintenance
service or similar qualified personnel to avoid
danger.
•
Do not repair the unit by yourself. Do not
disassemble the unit, if any malfunction is
detected or after the unit has been dropped,
unplug the unit and apply to any authorized
service center from the contact address list
given in the warranty certificate and on the
website www.vitek.ru.
•
To avoid damages, transport the unit in the origi-
nal package only.
•
Keep the unit out of reach of children and dis-
abled persons.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY. ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
ATTENTION!
•
Before grinding meat, make sure that all bones
and excess fat are removed.