Vitek Vt-3470 BK/W, User Manual, Page: 8 / 52

8
ENGLISH
•
Press (17) button to resume playback.
Stop playback
•
To stop the playback press Stop
<
button
(16) (or Stop button (3) on the remote con-
trol), the total number of tracks will appear on
the display (5).
Switching to the beginning of the previous
track or to the next track
• During the playback or in pause mode, press
9
or
:
buttons (or baCK and NeXt but-
tons on the remote control) to switch to the
previous or to the next track.
Switching to a certain track fragment
•
In the playback mode press and hold
9
or
:
buttons (or baCK and NeXt buttons on
the remote control) for quick switch to a cer-
tain track fragment.
Note:
– In the mode of quick switch to a certain track
fragment the sound will not be played if one
of
9
or
:
buttons ( BACK and NEXT on
remote control) is being pressed.
one track playback repeat
• To repeat one track, press rep button (18)
(or (12) button on the the remote control)
once, symbol «REP» will appear on the dis-
play (5).
all tracks playback repeat
•
To repeat all tracks on the disc press rep
button (18) ((12) button on the remote con-
trol) twice, symbol «REP ALL» will appear on
the display (5).
album playback repeat (albUM)
•
To play all tracks of the album (one of the
folders «F») press
rep button (18) (or (12)
button on the remote control) thrice, symbol
«REP ALBUM» will appear on the display (5).
random playback
• To play all tracks from the disc randomly
press
raNDoM button (8) on the remote
control, symbol “RANDOM” will appear on
the display (5).
Note:
• Activation of the repeat mode is possible in
«playback», «pause» or «stop» modes.
•
To cancel repeat playback, press REP button
(18) (or (12) button on the remote control)
several times until symbols «REP», «REP ALL»
or «REP ALBUM» disappear.
playback programming
You can program playback of maximum 99 tracks.
1.
In the stop mode press tIMe/proG but-
ton (19) on the front panel of the device or
proGraM button (9) on the remote con-
trol, symbol «PROGRAM» and the memory
cell number «P01» will appear on the display
(5).
2.
Choose the desired track by pressing
9
or
:
( baCK and NeXt on the remote control)
buttons.
3.
To save the chosen track in memory press
tIMe/proG. button (19) on the front panel
of the device or proGraM button (9) on
the remote control, the next memory cell
«Р02» will appear on the display (5), you
can save the next track into this cell (see
point 2).
4.
You can program up to 99 tracks, symbol
“FULL” will appear on the display in case of
exceeding the number of memory cells.
5.
To play all tracks in programmed order press
play/paUSe button (17) on the front panel
of the device (or (2) button on the remote
control).
6.
To cancel the programmed playback mode,
press
Stop
<
button (16) (or (3) button on
the remote control), open the CD compart-
ment lid (7) or press the
FUNCtIoN button
(to switch to another playback mode).
Note: Repeat playback functions are available in
programmed playback mode.
Note :
•
This device does not support playback from
HDD discs and some MP3 players.
troubleshooting
Inappropriate usage of device is often the
cause of device malfunction or low quality play-
back. If you consider that there is something
wrong with the device, check possible causes
in this table.
If you failed to solve the problem, contact the
nearest authorized service center.
VT-3470_IM.indd 8 14.01.2013 12:15:41