Vitek Vt-3470 BK/W, User Manual, Page: 6 / 52

6
ENGLISH
radio station.
2.
Press tIMe/proG. button (19) on the front
panel of the device or proGraM button (9)
on the remote control, symbol «PROGRAM»
will appear on the display and the memory
cell number «P01» will start flashing.
3.
Use p-Up and p-DoWN buttons to select
the number of a memory cell to save the
desired radio station.
4.
To confirm your selection press again tIMe/
proG . button (19) on the front panel of
the device or proGraM button (9) on the
remote control, the next memory cell «P02»
will appear on the display, and you can save
the next radio station.
5.
You can program up to 30 radio stations.
6.
Use p-Up and p-DoWN buttons on the front
panel of the device or the digital keyboard (6)
to switch between memory cells.
•
After you stop listening press poWer button
(3) on the front panel of the device or the (1)
button on the remote control or
FUNCtIoN
button to switch to another playback mode.
Note:
–
For better reception in the FM band extend
antenna (21) completely and place it under
the desired angle.
–
While tuning to the station, transmitting ste-
reo signal, the indicator ST will light up on
the display.
CD discs playback
Disc loading — open the CD compartment lid
(7) by pressing the groove (8). Insert a CD disc
with label up and close the lid (7).
ejecting — after the playback stops, open the
lid (7), symbol «OPEN» will appear on the display
(5) and take the disc out. Put the disc in a stor-
age box.
Always close the CD compartment lid (7) in
order to prevent dust and foreign objects get-
ting into the compartment. Always take the disc
out of the CD compartment if it is not being
played back.
1.
Connect the device to the mains.
2.
Press poWer button (3) on the front panel
of the device or (1) button on the remote
control.
3.
Press FUNCtIoN button (9) on the front
panel of the device or (13) button on the
remote control consequently to select the CD
playback mode.
4.
Open the lid (7), insert a disc with label up
and close the lid (7).
5.
After reading the information, the total num-
ber of tracks and symbol «CD» will appear
on the display and the first track will start
playing.
Note:
– This device can playback CD-R and CD-RW
discs
– If there is no disc or if the disc is damaged,
symbol “no” will appear on the display (5).
playback
• In the stop mode press play/paUSe button
(17) on the front panel of the device (button
(2) on the remote control), disc playback will
begin, the playing track number and symbol «
PLAY
4
» will appear on the display (5).
pause
•
To stop playback press play/paUSe button
(17) on the front panel of the device ((2) but-
ton on the remote control), symbol «PLAY
4
»
and playback time will be flashing on the dis-
play (5).
•
Press the button (17) to resume playback.
Stop playback
• To stop the playback press Stop
<
button
(16) ((3) button on the remote control), the
total number of tracks will appear on the dis-
play (5).
Switching to the beginning of the previous
track or to the next track
•
During the playback or in pause mode, press
9
or
:
( baCK and NeXt on remote con-
trol) buttons to switch to the previous or to
the next track.
Switching to a certain track fragment
• In the playback mode, press and hold
9
or
:
( baCK and NeXt on remote control) but-
ton for a quick switch to a certain track frag-
ment.
Note: In the mode of quick switch to a certain
track fragment the sound will not be played if
one of
9
or
:
( BACK and NEXT on remote
control) buttons is being pressed.
VT-3470_IM.indd 6 14.01.2013 12:15:41