7
ENGLISH
Setting time
When the microwave oven is connected to the mains, you’ll hear a sound signal, and
«0:00»
will ap-
pear on the display (10). You can set the time in the range
0:00
-
23:59
.
1.
Press the
“Clock/Presets”
button (13), on the display
(10)
flashing
«0:»
will appear.
2.
Turn the knob (16) to set «hours».
3.
Press the
“Clock/Presets”
button (13), on the display
(10)
flashing
«:00»
will appear.
4.
Turn the knob (16) to set «minutes».
5.
Press the
“Clock/Presets”
button (13) to finish time setting. On the display
(10)
the preset time
will appear and symbol
(:)
will be flashing.
Note:
–
If the clock is not set, the current time will not be shown on the display (10).
–
If you haven’t set the current time or pressed the
“Clock/Presets”
button (13), the display (10)
will show the original indications.
–
If you incorrectly input the current time, press the “Stop/Cancel” button (14) to reset the values
and repeat points 1-5.
Cooking in the microwave oven
Select the necessary power level of the microwave oven and set the cooking time.
1.
Open the door, put the products into the cavity and close the door.
2.
Press the
“Microwaves/Grill/Combi”
button (11), you will hear a sound signal,
“Р-100”
will be
flashing on the display.
To select the required power level press the
“Microwaves/Grill/Combi”
button (11) or turn the knob
(16). Power modes will be displayed.
Number of pressings
Display indications
Power of the oven
1
Р100
100%
2
Р80
80%
3
Р50
50%
4
Р30
30%
5
Р10
10%
3.
Press the
“Start/+30 sec/Confirm”
button (15) to confirm the selected power level; you will
hear a sound signal.
4.
Set the cooking time turning the knob (16). Time will appear on the display (10).
You can set cooking time in the range
0:05-95:00
with the step, stated in the table.
Time interval
Time setting step
0-1 min
5 sec.
1-5 min
10 sec.
5-10 min
30 sec.
10-30 min
1 min
30-95 min
5 min
5.
Press the
“Start/+30 sec/Confirm”
button (15) to start cooking, countdown of the remaining
time will start on the display (10). After the cooking process is over, the unit will be switched off,
and you will hear 5 sound signals.
VT-1699 belorus.indd 7
13.09.2012 11:51:52
Summary of Contents for VT-1699 SR
