
7
ENGLISH
release position, release the steam for about
1 minute, then close the steam by turning the
knob (4) « / » clockwise until bumping «
»
and switch the steam supply off by pressing
the button (19) «
».
13. Switch the coffee maker off by pressing the
on/off button (15) «
». Wait for 10-15 min-
utes.
14. Perform the steps 10 and 11 at least 3 times.
15. Repeat the cleaning procedure for the
steam release channels described in the
paragraph 12.
16. With small intervals, repeat the boiler clean-
ing procedure (paragraph 10) until the citric
acid solution dissolves in the tank (3) com-
pletely.
17.
Switch the coffee maker off by pressing the
on/off button (15) «
».
18.
Fill the tank (3) with clear water up to the
maximal mark, and repeat the steps 10, 12
not less than 3 times without the 10-15 min-
ute break.
19.
Switch the coffee maker off by pressing the
on/off button (15) «
».
Notes:
–
To remove the scale you can use special des-
caling agents for coffee makers and coffee
machines, strictly following the instructions
on their usage.
CLEANING
– Cleaning the filter (11): – you can wash the
filter in a dishwashing machine. If the openings
are blocked with the rest of ground coffee, you
can clean them with a small brush. To remove
the filter (11) from the holder (12) turn the filter
(11) counter/clockwise until the ledge on the
filter (11) appears in the groove of the holder
(12), remove the filter (11) pulling upwards.
– Clean the coffee maker body (5) with a soft,
damp cloth and then wipe it dry. Do not use
metal brushes, abrasives and solvents.
– Do not immerse the coffee maker body (5),
the power cord and the power plug into water
or other liquids.
– Wash the removable parts (3, 11, 12, 21) of
the coffee maker with warm water and mild
detergent, then rinse them and dry.
Drip tray (8)
– A red pop-up indicator (10) in the tray (8) grid
(9) will show when the tray (8) is full.
– Remove the grid (9) from the tray (8), remove
the tray (8) and pour out water, install the
tray back to its place, put the grid (9) on the
tray (8).
– If necessary, wash the tray (8) and the grid
(9) with water and soft detergent, rinse
and dry.
Troubleshooting
Malfunction
Cause
Solution
The coffee maker
can’t be switched
on
No voltage in the mains socket.
The power plug is not completely
inserted into the socket.
Make sure that the mains socket is operat-
ing.
Check whether the plug is completely
inserted into the socket.
Water leaks from
the lower part
of the coffee maker
The water tray is full.
Pour the water out of the tray
Coffee leak-
age from the filter
holder
Untight connection of filter and
boiler gasket, ground coffee got
on the edges of the filter.
Clean the edges of the filter.
Ready coffee has
a foreign smell
Wrong process of scale removal in
the coffee maker boiler
Improper storage of coffee
See the chapters «Before using the unit»,
«Descaling» and repeat them several times.
Use fresh ground coffee. Keep coffee in a
dry cool place.
Steam doesn’t froth
milk
Low temperature of outgoing
steam.
The tank is too big or of improper
size.
You used skimmed milk
Froth milk only after the indicator (20) lights
up.
Use narrow high container for frothed milk.
Use only whole milk with fat content 4-6%.
IM VT-1520.indd 7
8/23/19 5:00 PM