Vitek VT-1264 W, Manual Instruction

Page: 3 / 28

3
ENGLISH
IRON VT-1264 W
The iron is intended for ironing clothes and bed-
ding and for vertical steaming of fabrics.
DESCRIPTION
1.
Water spray nozzle
2.
Water inlet lid
3.
Continuous steam supply knob
4.
Burst of steam button
5.
Water spray button
6.
Handle
7.
Power cord protection
8.
Base of the iron
9.
Heating element on/off indicator
10.
Water tank
11.
Temperature control knob
12.
«Self-clean» self-clean button
13.
« max » water level mark
14.
Soleplate
15.
Beaker
SAFETY MEASURES
Before using the unit, read this instruction man-
ual carefully and keep it for future reference.
Use the unit for intended purposes only, as speci-
fied in this manual. Mishandling the unit can lead
to its breakage and cause harm to the user or
damage to his/her property.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
•
The power cord is equipped with a «euro-
plug»; plug it into the socket with a reliable
grounding contact.
• To avoid fire, do not use adapters for plug-
ging the unit in.
•
To avoid mains overloading, do not switch on
several electrical appliances with high power
consumption at a time.
•
Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemicals etc.
• Provide that the power cord is not on the iron-
ing board and make sure that it does not touch
hot surfaces.
• Never leave the operating unit unattended.
During operation breaks put the iron on the
base (in vertical position).
•
Before plugging/unplugging the iron, set the
temperature control knob to the minimum
position and switch the continuous steam
supply off. Always unplug the iron when you
are not using it.
•
To unplug the iron, always hold the power
plug, never pull the power cord.
• To avoid electric shock, do not immerse the
iron, the power cord and the plug into water or
any other liquids.
• Before taking the iron away, let it cool down
completely and pour out the remaining water.
•
Clean the unit regularly.
•
Do not immerse the unit body, the power
plug or the power cord into water or other liq-
uids.
•
Do not touch the unit body and the power plug
with wet hands.
• Do not allow children to touch the unit body
and the power cord during the unit operation.
•
Do not leave children unattended to prevent
using the unit as a toy.
• For children safety reasons do not leave
polyethylene bags used as packaging unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
•
This unit is not intended to be used by chil-
dren. Place the unit out of reach of children
during the operation and cooling down.
• The unit is not intended to be used by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
• Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction
is detected or after it was dropped, unplug
the unit and apply to any authorized service
center from the contact address list given in
the warranty certificate and on the website
www.vitek.ru.
•
Transport the unit in the original package only.
• For environmental protection do not dispose
of the unit with usual household waste after
its service life expiration; apply to a special-
ized center for further recycling.
• Keep the unit out of reach of children and dis-
abled persons.
•
Do not touch the surface of the unit marked
with the symbol
while ironing and after it.
Danger of burns.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
IM VT-1264.indd 3 30.03.2017 11:50:50