Vitec Multimedia CellCom 10, Instruction Manual

Page: 19 / 90

C E L L C O M 1 0 W I R E L E S S C O M M U N I C A T I O N S Y S T E M
2 - 7
• Audio from the 4-wire audio device will be audible from the wired
beltpack’s headset.
3. If the base unit is powered down and then up again, the talk paths from the
wired beltpack (on party-line channel A) are re-established to the 4-wire
device and to the two wireless beltpacks.
4. You can remove the talk paths from the wired beltpack’s party line to the other
devices by selecting PORTS, then PLCHA, then CALLS, then NONE, or by
disabling the party line from the front panel of the CellCom base station by
using the CH A and CH B enable buttons.