Vitea Care DRVM6C, Instructions For Use Manual

Page: 59 / 76

viteacare.com 59
Headrest adjustment
Fitting the position of headrest.
Three levers are present to adjust the headrest.
Indicator lamps and displayed information
To turn on the emergency light, press the button once. To turn off the
emergency light, press the left or right light button once.
Turn signal lights:
To turn on left (right) signal lights, please press left (or right) lighting
button for a while(3 seconds) and release. Left (or right) side LED will
light up.
To turn off signal lights, please press left or right lighting button once.
Front lights:
To turn on the headlight, press the button on the controller once. To
turn off the headlight, please press once, the left or right front light or
turn signal button.
• Turn the lever counterclockwise to loosen the joint.
• The user or caregiver can adjust the headrest to the
desired position.
• Turn the lever clockwise to lock in position.
1. It is necessary to hold the lever.
2. Press the screw located on the top of the lever.
3. Pull out the lever and slowly rotate it to the desired
position.
Adjustment and fitting of wheelchair components
ATTENTION!
To avoid damaging the lever, do not pull it out too hard.
SUGGESTION!
If there are obstacles between the levers, each lever can be pulled out
separately and rotated to the desired position.