EN
16
Controller
By pressing the buttons on the controller, you can select the following functions:
8
Operating lamp
9 AN / AUS (on / off)
On / Off switch
10 LENDEN (lumbar region)
Massage zone
3
is switched
on
11 BEINE (legs)
Massage zone
4
and
5
are switched on
12 WÄRME (heat)
Switch the heat on and off
13
Heat operating lamp
14
LEDs indicate the activated massage zones and the
chosen intensity.
15 RÜCKEN (back)
Massage zone
1
and
2
are switched on
12
14
9
10
11
15
8
13
Before Initial Use
Before using the device, remove all packaging materials and any labels that may be on
the device and are used for protection during transportation or for advertising.
Never
remove the rating plate and any possible warnings!
Use
PLEASE NOTE!
■
Do
not
use it in bed. Do
not
fall asleep during use.
■
The device must not be folded up or covered when it is switched on. Do not place the
mains cable or the controller on or beneath the device during operation.
1. Place the massage mat down on a sofa or chair, for example, or lay it out on the
fl
oor.
If necessary,
fi
x it in place with the fastening strap so that it does not slip.
2. Connect the barrel connector of the mains adapter to the connecting socket on the
controller and insert the mains adapter into an easily accessible plug socket.
3. Sit down or lie down on the massage mat so that the massage motors are located in
the middle.
4. Take the controller in your hand and press the
AN / AUS
(on / off) button. The
operating lamp lights up.
5. You can set the massage zone(s) of your choice by pressing the buttons on the
controller. You can increase the intensity of the individual massage zones by pressing
the respective button again (see the “Device Overview” chapter – “Controller”).
6. Also switch on the heat function if necessary (see the “Device Overview” chapter –
“Controller” ). You can also switch on the heat function exclusively by pressing the
WÄRME
(heat) button instead of a massage zone.
