Operating Instructions
1. Insert the power plug into power point.
2. Turn on the main power switch which is under the water proof transparent cover.
3. Place the blender jar on the base so it feels secure. Make sure the lid is always
secured BEFORE starting the blender.
4. There are three manual speeds - LOW, MEDIUM, HIGH and a pulse button. Pulse is
HIGH speed and will operate for as long as you hold the button down.
5. For TIME operation, there are three choices - 35, 60 and 90 seconds for automatic
blend and shut off.
6. The red LED light will display during operation and after completion of the selected
operation time, you will hear a long-beep.
NOTE: To stop operation at any time simply press any button.
7. A safety overload switch is located under the base of the blender and can be used if
the motor turns off in protection mode.
Operating Hints and Tips
1. Always place some liquids into the jug when crushing ice.
2. Always operate only when jug has ingredients in it.
3. Wait until the motor and blades have stopped until removing the jug.
4. Wipe off all water from the container cushion before starting the blender. Any
water going into the motor may / will cause damage to the motor.
