35
IFU-26 Rev. J | December 2021
Pairing the Device
Take Blood Pressure
Pair New
Use Bluetooth
Manual Entry
Currently using Bluetooth Upload.
No device is currently paired. Select
Pair New
to begin the pairing process.
Model UA-651-BLE
Section 27:
Blood Pressure (A&D UA-651 Arm)
The A&D UA-651 is an optional blood pressure monitor
that can upload blood pressure readings automatically
using Bluetooth.
Your care team may direct you to take blood pressure
readings with this device on a regular schedule (for
example, one or more times per day).
Refer to the
A&D Model UA-651 Instruction Manual
for
basic instructions on setting up the device, including
installing batteries and using the blood pressure cuff.
NOTE:
If the device has already been paired, go directly
to
Step 4 “Take A Reading”
below.
1. Find the Bluetooth ID (Optional)
Note:
This step is optional, and is only necessary when
using the UA-651 in an environment where multiple
similar devices are being used (such as a hospital).
To find the Bluetooth ID, turn the base unit over and find
the label above the battery compartment. The Bluetooth
ID begins with “BT”. You will need this for
Step 2 below
.
2. Pair New in VistaPoint
a.
Put the device in pairing mode by holding down the
START
button until “Pr” is displayed. It is now in
pairing mode.
b.
Tap
Take BP
in the Blood Pressure tile (or
Take a
Measurement
on VistaPhone and then
Take BP
).
c.
Tap
Use Bluetooth
.
d.
Tap
Pair New
.
e.
Tap
Model UA-651
as the model.
f.
“Scanning for Devices” will display. Tap the Bluetooth
ID of the blood pressure device when it appears. It
should match the ID in
Step 1 above
.
Note: If you see a message asking you to confirm the
device pairing, tap
Confirm
.
Blood Pressure Cuff
Model UA-651 Base Unit
START
Button
Bluetooth ID
Select UA-651-BLE
Select Bluetooth ID
Scanning for Devices
Devices Found:
00:0B:57:AC:0B:13
Tap
Pair
New
Tap
Use Bluetooth
Take BP
A&D UA-651
Finding the Bluetooth ID
Tap
Take BP or
Take a Measurement