5
Attachment Comb
•
Attachment Comb #0.5 leaves 3mm (1/8 inch) hair length.
•
Attachment Comb #1 leaves 5mm (1/6 inch) hair length.
•
Attachment Comb #2 leaves 7mm (1/4 inch) hair length.
•
Attachment Comb #3 leaves 9mm (3/8 inch) hair length.
•
To attach a comb, hold it with its teeth upward and slide it onto and along
the clipper blade. To remove the comb, simply pull the comb upward and away
from the clipper blade.
•
For even cutting,allow the comb attachment/cutter to cut its way through
the hair. Do not force it through quickly. Also remember to comb
the hair frequently to remove trimmed hair and to check for
uneven strands.
•
Each comb attachment is marked accordingly on its outside
middle surface.
STEP 1- NAPE OF THE NECK
•
Attach comb attachment 3mm or 5mm.
•
Hold the clipper cutting edge pointed up and begin the haircut,
starting at the center of the head at the base of the neck (see
diagram 1).
•
Hold the clipper comfortably in your hand and hold lightly against
the head with the comb teeth pointing upward. Gradually and
slowly lift the clipper, working upwards and outwards, through
the hair, trimming just a little at a time.
•
As you cut, gradually lift the hair clipper head towards you.
Continue to cut the back area from the bottom of the neck
upwards to the top of the ears.
DIAGRAM 1
DIAGRAM 2
DIAGRAM 3
DIAGRAM 4
•
Cutting hair requires practice so it is always better to leave the hair longer for
the first few haircuts until you become used to the length to which each comb
attachment cuts the hair.