23
26
•
Conversely, if you do not want to confirm the new set data, select NO with the
“+” and “-” buttons, and confirm by pressing the START button to go back to the
screen that enables to repeat any operation required to change the parameters.
DELETE OF A PRE-STORED RECIPE
To delete a pre-stored recipe, please proceed as follows:
•
Enter the RECIPE MANAGEMENT menu by keeping the MENU button pressed
for 3 seconds.
•
Use the “+” and “-” buttons to let the menu words flow, then position on
DELETE and confirm by pressing the START button.
•
Select the number of the recipe to be deleted by using the “+” and “-” buttons,
then press START to confirm and pass on to the line below.
•
Position on YES with the “+” and “-” buttons and confirm by pressing the
START button.
•
The display will show the indication SURE DELETE, then get positioned on
YES with the “+” and “-” buttons and give confirmation by pressing the START
button. Then the subsequent screen OPERATION COMPLETED will appear.
•
Conversely, by selecting NO the program will be exited.
B. To store a recipe through the PC, writing even ingredients and quantities, or
to modify or delete a recipe from the SD card through the PC, download from the
SD card the software located in the folder “CreatorPRO” and install it following
the instructions.
SPECIAL FUNCTIONS
“WAIT TEMPERATURE” FUNCTION
This function,
particularly useful for pastry preparations, allows the machine
to reach a temperature that has been selected by the user, even a negative one.
Once this temperature has been reached, the recipe is completed (e.g. Custard),
but the WAIT TEMPERATURE function allows to keep mixing the completed
preparation, requiring that a TIME setting (below 04:00 hours) is set into the
machine.
When one wants to use the preparation, the machine must be stopped
MANUALLY, by pressing the START/STOP button.
PERSONAL TOUCH:
To facilitate the perfect success of the stored recipes, you can repeat the last
sequence of processing as follows:
• Press the “clock”
• You will hear a beep
• Set a time of your choice
• Press the “Start”
When making this operation, if you realize that you have set wrong data, please
press the recipe icon for 5 seconds, then you hear 4 beeps, and all data settings
will be deleted with the exception of the current time.
FOOD REHEATING (ONLY HOT SIDE B)
For this function, there is the program P00 in the recipe memory.
After pressing the START / STOP button, you’ll need to set the temperature
(ranging from 25° to 65 °) with the “+” and “-” buttons, then once the selected
temperature is confirmed by pressing “Start / Stop” button.
You should then confirm the time (0 - 4 hours), then after pressing “start / stop”,
the robot will start reheating the food at speed 0 at the set temperature and time.
HOW TO USE THE PRODUCT PROPERLY
• To chop, grate, pulverize and mount, the bowl should be perfectly clean and dry.
• To chop, grate, pulverize and mix, the volume of ingredients should never
exceed half of the bowl.
• When you need to chop, you should remind that speed is proportional to the
hardness of the ingredients, while time is proportional to the quantity of the
ingredients by chopping.
• When you are chopping small amounts of food (cloves of garlic, a sprig of
parsley, etc..) you should program speed and introduce the ingredients all of a
sudden through the hole in the lid.
• When you wash the blades, dry them very well and, if necessary, mount the
unit to work for a few seconds at maximum speed, so that drops of water will
step down the inside of the bowl.
• If you must chop harsh ingredients such as almonds, hazelnuts, chocolate,
etc.., set the required speed and the machine, second after second, will increase
its speed automatically.
• After chopping very hard ingredients such as ice, nuts, chocolate, etc..,
ALWAYS check that blades are still screwed perfectly.
• When cooking, never exceed the litre and half of ingredients (including liquids
and solids) otherwise you run the risk that the contents of the bowl could
overspill.
• While the unit is in operation, only use the supplied spatula to loosen the
ingredients from the sides of the bowl or mix them.
• To make preparations with boiling milk, always remove the cap from the cover while
cooking. After cooking, do not open the lid immediately, but let the blades turning
without any temperature set, until the milk has gone off the boil before opening.
• Do not place the unit near heat sources (stove, oven, etc..).
• When you want to move the equipment you need to lift it, and never drag it
while working: you may run the risk of damaging the functionality of the machine.
