5
START/STOP Button:
Pressing one of the PRE-SET PROGRAM buttons, while the motor is running,
will also stop the machine.
SPEED CONTROL Button:
These settings will reset if the power is shut off.
5
IMPORTANT NOTES!
START/STOP Button:
Pressing one of the PRE-SET PROGRAM buttons, while the motor is running,
will also stop the machine.
SPEED CONTROL Button:
These settings will reset if the power is shut off.
IMPORTANT NOTES!
DISPLAY Window –
This area, depending on which button is pressed, displays a variety of
operation messages. A “READY” message appears when there is power to the machine.
OWNER CONTROLS –
A control panel is accessible by pressing the Vita-Mix logo.
•
Press once
to reveal the mode message. Press button
1 then 6 within five seconds to continue. Once the
correct code is entered, the display will indicate the
motor temperature (NORM, WARM, HOT), a usage
count and a total. The “COUNT” is a machine usage
total and can be reset. This can be used to keep a
count of the number of drinks sold in a week, day or
even an hour. To clear, press and hold the START/STOP
button for 5 seconds. The “TOTAL” keeps track of the
machine usage, including production and testing, and
cannot be cleared.
•
Press twice
to reveal the name of the program
controlling the PRE-SET buttons. If you are using the
Advance settings, this will read VITA-MIX ADVANCE
PROGRAM.
•
Press a third time
to reveal an option to reset the
PRE-SET buttons to the original factory settings.
•
Press a fourth time
to reveal an option to reassign
any one of the available 34 recipes in memory to one
of six PRE-SET buttons.
•
Press a fifth time
to exit and continue blending.
HIGH/LOW PULSE Button –
The PULSE provides a quick increase or decrease in speed of
the blade when blending or refreshing a drink. Press H to increase the motor to speeds that
range from 51%-100%. Press L to decrease the motor speed down to a range of 50%-7%.
The PULSE button will override the running program as long as it is depressed. Once
released, the original program continues its cycle.
• The PULSE High (H) and Low (L) speed is set by using the SPEED CONTROL buttons. To
set, while pressing and holding a PULSE button, press the SPEED CONTROL
▲
or
▼
button until the desired motor speed is reached. The PULSE speed will remain at this
setting until changed again with the SPEED CONTROL buttons.
MODE
READY
TEMP
COUNT
TOTAL
NORM
25
100
VITA-MIX ADVANCE
PROGRAM #201
4 TO OVERWRITE
CURRENT PROGRAM
BUTTON SETUP
RECIPE 01