IMPORTANT NOTES!
• Check your blades daily for loose, nicked or missing parts. If you find something is loose, nicked or
missing, replace the blade assembly before use (see page 19). Do not tighten hex-headed screw
(on top of blade assembly). If loose, replace blade assembly.
• The instructions appearing in this Use and Care Manual cannot cover every possible condition and
situation that may occur. Common sense and caution must be practiced when operating and
maintaining any appliance.
1. If your recipe freezes up, try reducing the amount of ice. Compared to other blenders, you
do not need as much ice to make an equally frozen drink in a Blending Station
®
Advance.
2. Place liquids and soft foods in your container first. Hard items and ice should be placed last.
3. Whole, hard or frozen ingredients should be small. Solid frozen fruit is extremely difficult to
blend. For best results, use semi-frozen fruit. Using same size batches of semi-frozen fruit
and ice will keep your drinks consistent. If you notice chunks, reevaluate the batch size.
4. When creating recipes, always allow for enough liquid to ease the blending process. For
recipes with minimal liquid, use the SPEED CONTROL buttons to run the machine on its
lowest settings until it is processing smoothly. Finish blending by using one of the Pre-Set
Programs that best matches the drink’s viscosity.
Maintenance Tips
•
NEVER bang the container against a surface to loosen the ingredients.
Remove the
container from the base and use a rubber spatula to remove thick mixtures from the
bottom of your container.
•
NEVER shake or rattle a container while in use.
• NEVER remove the container before the machine has come to a complete stop.
• NEVER start the motor before the container is in place.
15
