www.vistacnc.com
- 8 -
www.vistacnc.com
- 8 -
iMach
III
P4-S Pendant Manual v. 4.0
2.5
FEED RATE mode
2.5.1 In F% mode, turning MPG changes feed rate overridden (FRO) rate from 1% to 250 %. FRO
rate can be changed when axes are moving
.
□
Feed Rate Override percentage.
□
Feed Rate Override, Unit/Min.
2.5.2
While pressing and holding the EN side button
, turn MPG few steps to select the
predefined Feed Rate Overridden (FRO) or Feed Rate. Selection to use FRO or Feed rate, and
different Feed Rate Overridden (FRO) or Feed Rate can be set up in PlugIn Configuration table.
Quick Selection is disabled when program is running or axes are moving
.
2.6 SPINDLE SPEED mode
2.6.1 In S% mode, turning MPG changes spindle speed overridden rate from 1% to 250 %. Spindle
speed can be changed when the spindle is running
.
□
Spindle Speed RPM.
□
Spindle Speed Override.
□
Current pulley number.
Checking “Display Spindle Speed RPM” in Plugin Configuration Table to display Spindle RPM.
2.6.2 While pressing and holding the EN side button
, turn MPG few steps to select the
predefined Spindle speed Rate Overridden (SRO) or Spindle Speed. Selection to use SRO or Spindle
