vistaCNC iMachIII P4-S, Manual

Page: 4 / 14

www.vistacnc.com
- 4 -
www.vistacnc.com
- 4 -
iMach
III
P4-S Pendant Manual v. 4.0
CONNECTION and START

Directly plug the USB cable into any USB port on the PC.
 Start Mach3 application.

Click Config from menu, select Config Plugins, and enable iMach3-P4-S-Pendant.

Close Mach3 application and restart Mach3 application.
FUNCTIONS and OPERATIONS
1. Axis selection
1.1
Press X/A, Y/B or Z/C axis selection button to select an axis to jog. X axis and A axis, Y axis
and B axis, or Z axis and C axis share the same button. Press the button again to select A, B or
C axis.

A, B and C axis selection can be skipped based on the settings in PlugIn configuration table. See
Pendant PlugIn Configuration section for more information
.