www.vistacnc.com
- 5 -
www.vistacnc.com
- 5 -
iMach
III
P4-S Pendant Manual v. 4.0
2.
MPG (Manual Pulse Generator) mode selection
At any time, pressing and releasing SCR (SCReen) button
within 1 second will open
or close the TAB window on Mach3 screen, and pressing and holding SCR button for more
than 1 second and releasing the button will change Mach3 screens. Screen selection can be
setup in PlugIn configuration table.
Number of decimal digits to display can be setup in the Plugin Configuration Table:
□
2 decimal digits
2.1
STEP, STEP SIZE and STEP JOG RATE
mode
2.1.1
STEP
In STEP mode, the selected axis moves 1 step at each MPG click (detent) with the step
size currently in the system and with speed of step jogging rate.
□
Selected axis name. It flashes at ½ second rate.
□
Step jogging rate in units/minute,
□
Step size. The step size and rate display changes
alternately every 2 seconds
