Precautions
2
Precautions
•
•
•
Safety
Installation
Cleaning
Get to know the Remote Controller
Packing List
In addition to this installation sheet:
•
•
•
•
•
•
Torx driver x 1
D5 fixing screws x 3
T6 fixing screw x 1
Wall plugs x 3
Cable entry robber grommet
(3/4”, for dome base use) x 1
Remote Controller x 1
UP/DOWN: Move up and down on OSD menu or
increase/ decrease a value.
ENT : Select and save changed values.
SEARCH: To view the first frame when an event occurs.
RECORD: To start and stop recording.
PLAY CONTROL: REW / PLAY / FF / STOP / PAUSE / MUTE
LEFT/RIGHT: To rewind & forward or move the cursor right/ left.
MODE: To toggle between live mode and playback mode.
Front view
4
5
3
6
7
8
1
2
MENU: To display the OSD menu on screen.
* When using the remote control, point it at IR receiver on the board.
* IR receiver operation range should be within 60° for horizontal angle
and the distance of Max. 6m. (See image left)
* When the remote control does not work, replace
its battery on the rear. (See image right)
* Button Cells Battery : CR2025 / 3V
+
Note
IR Receiver
30
°
30
°
6m
Operation Range
Rear
- Should any liquid or solid object fall into the unit, unplug it and have it checked by a qualified person
before operating again.
- Unplug the unit from the wall outlet if it is not going to be used for several days. To disconnect the cord, pull it out
by the plug , never by the cord itself.
- Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces(rugs, blankets, etc).
- The height and linearity controls located at the rear panel are for adjustment by qualified personnel only.
Do not install the unit in extremely hot or humid environments or places exposed to excessive dust or mechanical
vibrations.
Clean the unit with a slightly damp soft cloth. Use a mild household detergent. Never use strong solvents such
as thinner or benzene as they might damage the finish of the unit.
