Camera Adjustment
9
A : Focus adjuster
B : Field of view adjuster
C : DIP switches
D : ALC adjustment
E : V-PHASE adjustment
A
E
C
D
B
2
1
3
4
6
5
ECE
ON
Video ALC
V-PHASE
ALC
V-PHASE
-/+
L.L
D/N
AWB
FL
BLC
AGC
1
2
3
4
5
6
*
*
*
ALC Adjustment
This is factory set. It should not
normally require adjustment.
V-PHASE Adjustment
It is only active when the camera is
supplied with a 24VAC power source.
*
**
DIP Switch Settings for the High Resolution Series
The bank of DIP switches allows the following settings:
Line Lock (INT/LL)
In LL Mode, the V-Phase may be adjusted to compensate
for connected supply phase differences.
Only applicable for 24VAC supply – otherwise the camera
should be operates with INTernal sync.
Day/Night Mode (OFF/ON)
When ON the camera operates in monochrome mode in reduced lighting.
Auto White Balance (AWB Normal/AWB EX)
AWB: The camera operates in the normal AWB range 2700K~11000K.
AWB EX: The camera runs in the extended AWB range 2000K~18000K.
Flickerless mode (FL/ON)
The camera reduces flicker in the image under fluorescent lighting.
Back Light Compensation (BLC)
When set ON, this option reduces the camera’s response to strong, unwanted lighting effects behind the
required subject.
Low Light Sensitivity (AGC-EX/AGC-NORMAL)
When set to EX, sensitivity in low light will automatically increased.
Select “NORMAL” will remove noise from the image, but it will also limit the camera’s sensitivity.
L.L
D/N
AWB
FL
BLC
AGC
INT
OFF
NORMAL
OFF
OFF
EX
LL
ON
EX
ON
ON
NORMAL
OFF
FUNCTION
ON
1
2
3
4
5
6
