Vista Quantum PLUS H.264, Installation And User Manual

Page: 46 / 140

46
Vista QPlus H.264 V2.2 (RP03)
Quantum Plus H.264 installation and user manual
Video Type
Video Type can set in this menu without rebooting or initialisation. The default is PAL, NTSC
can also be selected
IR Remote ID
The remote control can be used to control up to 16 Quantum‟s, the ID number on each can
be set to a unique address so that the remote will only control one at a time if they are in
close proximity. The default is 11.
To select a unit on the remote control press the ID button, followed by a 2 digit code (e.g. 05
for DVR 5) , followed by the ID button again. The LED will flash slowly.
Initialization
All the menu settings will be returned to the factory default. To carry out this function the
system recording will have to be turned off.
Information
The Information Screen shows the hard disk size, current firmware revisions, IP address and
MAC address