Vista Quantum PLUS H.264, Installation And User Manual

Page: 112 / 140

112
Vista QPlus H.264 V2.2 (RP03)
Quantum Plus H.264 installation and user manual
Beep Out
Alarm Out
The internal buzzer can be set to sound on
the following occurrences:
Video Loss
Alarm activation
Motion Detection
Power loss
The duration of the buzzer can be set.
The Alarm output relay can be set to activate
on the following occurrences:
Video Loss
Alarm activation
Motion Detection
Power loss
Smart
– Disk test
The duration of the relay closure can be set.
If the relay follower is set to yes, each time a
camera is selected a relay out put on the rear
of the DVR will close. This can be used as the
alarm input to a switcher to allow the monitor
outputs of multiple DVR‟s to be switched to a
single monitor.
Relay control
– if set to Yes then the relay can
be remotely toggled via the relay control icon
on the client software.