Vista QP960H Installation And User Manual Download

Page: 8 / 100

Quantum 960H DVR range manual V1.2

2. Features

● Convenience

- User-friendly GUI (Graphical User Interface)

- Easy-to-use menu structure

- Easy-to-use recorded data search (Time, Date, Motion, and Alarm)

- Easy-to control via Front Panel, IR remote control and USB 2.0 mouse.

●

Stability

- Auto restart after power interruption

- DB structure offers data stabilisation and better storage utilisation

● Expandability

- Remote

DVR’s can be controlled using the supplied software client viewer.

● Technology

- Embedded LINUX OS

- Maximum record rate 400fps@960H(PAL)

- High-resolution & high-quality H.264 algorithm

- Uses watermarking & scrambling technologies,

● Functionality

- Variable recording function (normal, alarm, motion, schedule, duration, Time Lapse,)

- RS485 and FSK Telemetry

- Full channel real-time monitoring

- Live monitoring, recording, playback, backup, remote access simultaneously

- Multi channel playback

(QX960H real-time on all views, QP960H real-time on quad display)

- Variable events notification to e-mail, buzzer or PC Client system

Summary of Contents for QP960H





































































































Search results

Summary of Contents for QP960H

Reviews:

Related manuals for QP960H

Brands by name

Popular brands

Vista QP960H, Installation And User Manual

Search results

Summary of Contents for QP960H

Reviews:

Related manuals for QP960H

Brands by name

Popular brands