Vista QP960H Installation And User Manual Download

Page: 27 / 100

Quantum 960H DVR range manual V1.2

<Quad Screen>

Spot settings is used to configure the 2 spot monitor outputs. The Spot monitors can respond

to Alarms, Motion, Audio, or can be configured for full or multi-screen sequences.

Use the Select key to turn the Mode box from blue to green, use the up and down arrows to

select the mode between multi-screen options; Alarms, Motion or Audio.

Once the mode has been selected, you can select either a duration or On/Off option (Mode

dependant). Use the Select button to turn the box from blue to green then use the Up and

Down keys to alter value. Press select to turn back to blue.

Alternatively, use the mouse to select mode by repeatedly clicking in the Mode box. Then

select the duration or On/off for each channel.

Summary of Contents for QP960H





































































































Search results

Summary of Contents for QP960H

Reviews:

Related manuals for QP960H

Brands by name

Popular brands

Vista QP960H, Installation And User Manual

Search results

Summary of Contents for QP960H

Reviews:

Related manuals for QP960H

Brands by name

Popular brands