Important Precautions
Warning
To ensure the proper function of the equipment
and the safety of the user, please following the under
mentioned instructions during installation, use and
maintenance:
Installation Instructions
◆
Please do not use the equipment in the following
environment: shaking, dusty, oily, smoky, conducting
dusty, filled of corrosive gas and flammable gas. Also,
please don’t expose the equipment to high
temperature, condensing, wind, rain. Electrical
shocking, fire and wrong operation can also damage
the product.
◆
When screwing and cabling, please don’t drop the
sweepings and wire leads into the controller’s vent
hole, or, fire, malfunction and wrong operation may
be caused.
◆
After the installation, please be sure that the vent
hole is not been blocked, or, the heat will not be
yielded properly and fire, malfunction and wrong
operation may be caused.
◆
Please don’t wire or plug/unplug the cable while
it’s still live, or, electrical shock and circuit damage
may happen.
◆
The installation and wiring should be stable, and the
poor contact may cause wrong operation.
◆
In the place where sever interference exists,
shielded cable should be used as the I/O cable for the
high frequency signal to improve the transmitting
quality.
Wiring Instruction
◆
Before the installation and wiring, please cut all the
power supply, or electrical shock or damage to the
equipment can be caused.
◆
This product should be well grounded before using.
◆
After the installation and wiring, all the sundries
should be cleaned up, and the covers and panels
should be put back and fixed well in order to avoid
electrical shock.
Operation and maintenance instruction
◆
Please don’t touch the connectors when they are
electrified, or electrical shock or wrong operation
may happen.
◆
Please cut the power first before cleaning the
cleaning and winding up the connectors. Operation
when they are electrified can cause electrical shock.
◆
Please cut the power first before wiring or
disconnecting the communication signal cable,
extension modules or control units, or damage can be
caused to the equipments.
◆
Please do not dismantle the equipment to avoid
damages to the internal components.
◆
Please read this manual carefully, and ensure that all
your operations are safe before changing the program,
debugging the program, turning on the system and
stopping the operation.
◆
The button cell can only be replaced when the
equipment is not electrified. If the replacement has to
be done with the electricity is on, it should be
operated by professional person with insulating
gloves on.
Product Disposal instruction
When disposing the product, please take the following
instructions:
