reducing the host life.
A: due to the host using a 100-240V switching
power supply, the better to prevent static electricity,
attention must use a grounded three-core power cable,
do not use the two-core power cable.
B: Check the local power outlet ground terminal
is a good grounding.
3
、
Radiation panel indicator does not light
Please check the power cord is connected
properly with the radiation panel.
4
、
Receiver abnormal working
A: If you use the battery, check battery is
sufficient, if installed correctly.
B: If you use rechargeable batteries, check
whether the charge to saturation.
C: Check the headset and the receiver is
connected properly.
D: Check whether the receiver can receive the
infrared signal of sufficient strength.
E: Check the volume is turned on, and opened to
the maximum volume.
F: Please avoid direct rays of the receiver with a
strong light, such as: not blasting dew in the sunlight.
G: If the receiver with noise or sound is distorted,
adjust the receiver and the radiation panel or adjust the
distance between the receipt of direction.
5
、
When Receiver charging
When the receiver into the charging box VIS-
VLI703-8/16 when the receiver was red and green
lights flashing, please check the contacts on the
receiver contact with the charger is good contact, back
into the fixed, to be directed flashing red light when
the state, the receiver is in charge state.
The same time, charging indicator light does not
shine, need to check the receiver inside the battery is
installed properly.
Receiver needs to check whether the
temperature anomaly.
