VISSONIC Electronics Limited www.vissonic.com
output channels and overriding all other audio
inputs
⑬
HF signal input
1 BNC connector for receiving HF signal from
other transmitter
⑭
HF signal output
6 BNC connectors for output HF signal to radiator. To
each connector, up to 30 radiators can be connected
⑮
AUDIOLINK port
Connect to the conference main unit
VIS-DCP2000 series or connect to the interpreter unit
VIS-INT64
⑯
Dante
Connect to the Dante network, support maximum 8 ch
digital audio in or 8 ch digital audio out
For communication between the conference main
unit and the PC under TCP/IP protocol to realize Web
server and remote controlling; furthermore, it enables
remote controlling by wireless touch panel through
central control system
⑱
RS232
For connecting to a central control system for
central controlling
⑲
Power inlet
support AC100V-240V
50Hz/60Hz,
self-adaptive.
⑰
Ethernet
2.5
Connection
Typical system connection includes:
⚫
to CLEACON series full digital networked DSP conference system
⚫
to interpreter unit
⚫
to external audio sources
⚫
to emergency signal switch
⚫
to another transmitter
2.5.1
To CLEACON full digital networked DSP
conference system
The transmitter can be directly connected to the
AUDIOLINK network of the CLEACON full digital
networked DSP conference system. Use an CAT5
cable to connect one of the AUDIOLINK sockets of
the transmitter to the CLEACON network (see the
next figure). The network mode must be enabled with
the configuration menu.
Digital IR Language Distribution System User Manual
7
