1) Change Parameter
* Initial Value of FPD : Means FPD value, early assigned
* Initial Value of PD : Means PD value, early assigned
* Height of Optical Center : Means vertical distance between optical center
and frame center
* BiF Chuck Layout Hor : Horizontal distance at near part side from bi-focal lens
* BiF Chuck Layout Ver : Vertical distance at far part side from bi-focal lens
* Bevel Polish : Means bevel polishing is available or not
* Chamfering Mode : Means chamfering is available or not
* Barcode Memory : Means bar code function is working or not
* Check Cover Sensor : May check cover sensor is working and
may not begin edging if chosse YES and cover is open.
* Text Display : Shows text menu.
* Rework : Start from grooving :
If YES, rework begins from grooving and if NO,only last process are repeating.
--
--
--
-->
>
>
>
Initial Value of FPD
Initial Value of PD
Height of Optical Center
BiF Chuck Layout Hor
BiF Chuck Layout Ver
Bevel Polish
Chamfering Mode
Barcode Memory
Check Cover Sensor
Text Display
Rework : Start from grooving
Rework : Remove chamfering
Tracing Mirror Image
Network Address
Exit
69.00
62.00
2.0
5.0
5.0
Yes
F&R
No
Yes
Yes
No
No
R
No
*****
Change Paramete
r *****
<--
