lens edge and to the thickest place of lens edge in turns by pushing
5) Regulate beveling position
Beveling position may be able to be regulated in RATIO
and LENGTH both.
RATIO menas the rate from lens thickness to
beveling position.
LENGTH means the distance from lens inside
to beveling.
To begin with, confiming the position line of
sectional part , push and activate screen
and push or and then the figures
may be able to be regulated.
RATIO and LENGTH may be able to be switched
Fig. 17
by
Be sure to be careful to use LENGTH function simply because it is only useful for
describe delicate function ,whch RATIO function may not be able to describe.
6) Push again and start edging.
Roughing
Finishing edging
Polishing (When choose )
Chamfering (When choose )
Edging is done ( switched to home)
7) Pull complete lens out
Open sliding cover and take the lens , push
key and pull lens out.
Warning
Pull lens out after opening sliding cover and the wheel is stopped throughly.
The operator may be able to be injured by the breakage or broken frictions
Grooving
12
5
5
5
5 5
5
5
5
RATIO 5.0 : 5.0
LENGTH(mm) 6.0 : 6.0
Ex.) Lens Thickness :12mm
Ratio : 5 : 5
