Vispero enhanced vision amigo, Manual

Page: 67 / 78

Enhanced Vision
Amigo Advanced Features and Functions 63
Change the Standby Time
The standby time indicates what period of inactivity is required for the Amigo
to go into Standby mode.
To set the standby time:
1.
Press and hold Sn Color Mode for 0.5 seconds and go to
Main
Menu > Settings Menu > System Settings > Standby Time .
2.
On the Standby Time screen, use the Zoom buttons to highlight the
amount of inactive time required before the system automatically goes
into standby. The minimum is None and the maximum is 30 minutes . If
you highlight 20 minutes , for example, the Amigo goes into Standby
mode when no buttons are pressed on the device for 20 minutes.
3.
Press the Color Mode button to set the standby time. The new standby
time is immediately applied.
Tip:
Consider your own usage habits when making this selection. If you
tend to put down the device frequently, a short standby time would be
appropriate. If you tend to use the Amigo for extended periods, consider
a longer standby time.
4.
Press the Snapshot button to return to the previous menu or press and
hold Sn Color Mode for 0.5 seconds to display Live view.