Vispera Infinite Vision 24SOLO1, User Manual

Page: 13 / 43

11
Connections
You’ll be up and running in no time
First time setup
1. Connect one end of an RF coaxial cable (not
supplied) to the aerial socket in your wall. Connect
the other end of the cable to the RF (75)socket in the
right side connection panel on the back of the TV.
2. Attach all other devices to the TV following the advice
given in the instructions supplied with them.
3.
Slot the plug on the TV’s mains cable into a wall
socket and turn the power on if required.
4. In standby mode, press the button on the right
of the TV or on the remote control to turn the TV on.
The red LED indicator on the front of the TV will turn
blue, then you will go to the First Time Installation
menu.
5. Language is preset to English.
6. Press buttons to select country and use
buttons to set the desired country.
7. Press buttons to select Environment and use
buttons to select between Home Mode and
Store Mode. If you select to change to Store Mode,
a warning screen will appear asking if you do, select
YES or NO to continue.
8. Once you have completed all of the preliminary
settings, press buttons to select Auto Tuning
and then press OK button to start channel tuning.
9. Once the tuning process has been completed the
Country menu will be shown, press the OK button
to confirm.
Select Country
GBR
OK
Select
BASIC FEATURES
Adjust
EXIT
Exit
Move
OK
Select
Auto Tuning
Language
Deutsch
English
Country
UK
Environment
Home Mode
First Time Installation