6
D-301436
2.
Drill 3 holes on mounting wall and insert 3 screws
into the bracket slots then tighten screws to
secure bracket (see Figure 7b).
3.
With the bracket mounted on the wall, position the
Base Unit so that the top two hangers of the
bracket are fitted onto their respective holes
followed by the bottom hanger (see Figure 7c).
Note:
Please use a Philips flat pan head
screwdriver type AB P/N 6x1 in. and wall plug
anchors.
Figure 7b
Wall Mounting – Mounting Bracket on Wall
For wall mounting
rotate the bracket 180
º
Correct
bracket
position
Figure 7a
Wall Mounting – Correct Positioning of Bracket
HOLES FOR
HANGERS
Figure 7c
Wall Mounting
– Attaching Cabinet to the Bracket
USING YOUR SYSTEM
Using your Base Unit
Your Base Unit is the communication center of
your system. When your pendant transmitter or
optional fall-detector/smoke detector signals the
Base Unit, the Base Unit contacts your Monitoring
Center to report the emergency event.
Your Base Unit includes the following buttons.
•
EMERGENCY (red)
– When pressed, an
emergency alarm is reported to the Monitoring
Center and a two-way voice communication is
opened between the unit and the Monitoring
Center.
•
CALL (gray)
– When pressed, a non-emergency
message is reported to the Monitoring Center and
a two-way voice communication is opened
between the unit and the Monitoring Center.
•
CHECK (gray)
– This button should be pressed to:
-
Answer Incoming Calls. When the phone rings,
pressing this button activates the speaker
phone.
-
Acknowledge Programmed Reminders, such
as confirming you have taken medication.
-
Change the status of the unit to HOME or
AWAY. To do this, press this button
continuously for 5 seconds.
-
Announce Time – press this button for 1 second.
•
Direct Link (white)
– The Base Unit includes 3
buttons for unique direct link, as described in the
next section.
Using your Pendant Transmitter
The pendant transmitter can be used to initiate an
emergency call and also to answer incoming calls.
•
Pendant Activation
- Your pendant transmitter
lets you signal to the Base Unit from anywhere in
your home when you need emergency assistance.
You should wear your pendant transmitter
whenever you are at home even in the shower or
bath. Your pendant transmitter is waterproof.
