background image

12 

D-301436 

GENERAL RF DISCLAIMER 

Due to the varying range of wireless systems, Visonic and its partners are not held liable if the system does not 
receive or process the RF transmitted communications signals as specified. Radio Waves pass through wood and 
plastic with very little attenuation (loss of signal strength). The same radio waves pass through concrete, earth and 
living matter with greater loss of signal strength and reflect off of metal. To better ensure the reception, initial and 
regular range testing procedures must be followed. This device complies with part 15 of the FCC rules. 

CUSTOMER PREMISES EQUIPMENT AND WIRING 

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a 
telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of 
RENs should not exceed five. To be certain of the number of devices that may be connected to a line, as determined by the 
total RENs, contact the local telephone company. The REN of an alarm system is part of the product identifier that has the 
format US:VSOAL00BAMBERNA. 

RJ-31X

JACK

RJ-31X CORD

TO WALL JACK

1

2

3

4

5

6

7

8

For locations with

DSL service

DSL

FILTER

TELEPHONE

LINES

 

Note:

 For whole house 

line seizure with DSL 
service present on the 
phone line, you must 
install a filter. It is 
suggested to use the 
DSL alarm filter model 
Z-A431PJ31X manu-
factured by Excelsus 
Technologies, or 
equivalent. This filter 
simply plugs into the 
RJ-31X jack and 
allows alarm reporting 
without breaking the 
internet connection.

 

     

WARRANTY

 

 

Visonic Limited (the “Manufacturer") warrants this product only (the "Product") to the original purchaser only (the 
“Purchaser”) against defective workmanship and materials under normal use of the Product for a period of twelve 
(12) months from the date of shipment by the Manufacturer.   
This Warranty is absolutely conditional upon the Product having been properly installed, maintained and operated 
under conditions of normal use in accordance with the Manufacturers recommended installation and operation 
instructions.  Products which have become defective for any other reason, according to the Manufacturers 
discretion, such as improper installation, failure to follow recommended installation and operational instructions, 
neglect, willful damage, misuse or vandalism, accidental damage, alteration or tampering, or repair by anyone other 
than the manufacturer, are not covered by this Warranty. 
The Manufacturer does not represent that this Product may not be compromised and/or circumvented or that the 
Product will prevent any death and/or personal injury and/or damage  to property resulting from burglary, robbery, 
fire or otherwise, or that the Product will in all cases provide adequate warning or protection.   The Product, 
properly installed and maintained, only reduces the risk of such events without warning and it is not a guarantee or 
insurance that such events will not occur.  

THIS WARRANTY IS EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, OBLIGATIONS 
OR LIABILITIES, WHETHER WRITTEN, ORAL, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE.  IN NO CASE SHALL 
THE MANUFACTURER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES 
FOR BREACH OF THIS WARRANTY OR ANY OTHER WARRANTIES WHATSOEVER, AS AFORESAID. 

THE MANUFACTURER SHALL IN NO EVENT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, 
CONSEQUENTIAL OR PUNITIVE DAMAGES OR FOR LOSS, DAMAGE, OR EXPENSE, INCLUDING LOSS OF 
USE, PROFITS, REVENUE, OR GOODWILL, DIRECTLY OR INDIRECTLY ARISING FROM PURCHASER’S 
USE OR INABILITY TO USE THE PRODUCT, OR FOR LOSS OR DESTRUCTION OF OTHER PROPERTY OR 
FROM ANY OTHER CAUSE, EVEN IF MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGE. 
THE MANUFACTURER SHALL HAVE NO LIABILITY FOR ANY DEATH, PERSONAL AND/OR BODILY 
INJURY AND/OR DAMAGE TO PROPERTY OR OTHER LOSS WHETHER DIRECT, INDIRECT, INCIDENTAL, 
CONSEQUENTIAL OR OTHERWISE, BASED ON A CLAIM THAT THE PRODUCT FAILED TO FUNCTION.

 

 

However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or damage arising under this 
limited warranty, 

THE MANUFACTURER'S MAXIMUM LIABILITY (IF ANY) SHALL NOT IN ANY CASE EXCEED 

THE PURCHASE PRICE OF THE PRODUCT,

 which shall be fixed as liquidated damages and not as a penalty, 

and shall be the complete and exclusive remedy against the Manufacturer.  
When accepting the delivery of the Product, the Purchaser agrees to the said conditions of sale and warranty and 
he recognizes having been informed of. 
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so these 
limitations may not apply under certain circumstances.  
The Manufacturer shall be under no liability whatsoever arising out of the corruption and/or malfunctioning of any 
telecommunication or electronic equipment or any programs. 
The Manufacturers obligations under this Warranty are limited solely to repair and/or replace at the Manufacturer’s 
discretion any Product or part thereof that may prove defective.  Any repair and/or replacement shall not extend the 
original Warranty period.  The Manufacturer shall not be responsible for dismantling and/or reinstallation costs.  To 
exercise this Warranty the Product must be returned to the Manufacturer freight pre-paid and insured.  All freight 
and insurance costs are the responsibility of the Purchaser and are not included in this Warranty. 
This warranty shall not be modified, varied or extended, and the Manufacturer does not authorize any person to act 
on its behalf in the modification, variation or extension of this warranty. This warranty shall apply to the Product 
only.  All products, accessories or attachments of others used in conjunction with the Product, including batteries, 
shall be covered solely by their own warranty, if any.  The Manufacturer shall not be liable for any damage or loss 
whatsoever, whether directly, indirectly, incidentally, consequentially or otherwise, caused by the malfunction of the 
Product due to products, accessories, or attachments of others, including batteries, used in conjunction with the 
Products. This Warranty is exclusive to the original Purchaser and is not assignable.  
This Warranty is in addition to and does not affect your legal rights. Any provision in this warranty which is contrary 
to the Law in the state or country were the Product is supplied shall not apply.  

Warning: 

The user must follow the Manufacturer’s installation and operational instructions including testing the 

Product and its whole system at least once a week and to take all necessary precautions for his/her safety and the 
protection of his/her property. 

1/08

 

    

 

W.E.E.E. Product Recycling Declaration

 

For  information regarding the recycling  of this product  you must contact the  company from which you orignially purchased it. If you are discarding this product and not 

returning it for repair then you must ensure that it is returned as identified by your supplier. This product is not to be thrown away with everyday waste. 
Directive 2002/96/EC Waste Electrical and Electronic Equipment.

 

    

 

VISONIC LTD. (ISRAEL): 

P.O.B 22020 TEL-AVIV 61220 ISRAEL. PHONE: (972-3) 645-6789, FAX: (972-3) 645-6788 

VISONIC INC. (U.S.A.):  

65 WEST DUDLEY TOWN ROAD, BLOOMFIELD CT. 06002-1376. PHONE: (860) 243-0833, (800) 223-0020. FAX: (860) 242-8094 

VISONIC LTD. (UK):  

7 COPPERHOUSE  COURT, CALDECOTTE, MILTON  KEYNES. MK7 8NL. TEL: (0870) 7300800 FAX: (0870) 7300801 

INTERNET

:   

www.visonic.com

 

©

VISONIC LTD. 2008       AMBER CLASSIC / AMBER CLASSIC X USER GUIDE     D-301436    (REV. 2, 9/08) 

 

 

 

 

  

Summary of Contents for AMBER CLASSIC













Reviews: