Fon 0 93 64/81 76 00 - Fax 0 93 64/81 76 029 - [email protected] - www.visomax.de
6.3
Installing the grip
The enclosed grip can be screwed to the left (a) or right (b) of the device.
6.4
Attaching the polishing pad
Interrupt the air supply before you replace any accessories or wear parts. This preventive
measure prevents inadvertent start-up of the compressed air tool.
1
Support disc
2
Polishing pad
The surface of the support disc consists of hook-and-loop fabric so that polishing pad can be
attached quickly with hook-and-loop adhesion.
Push the polishing pad firmly against the bottom of the support disc.
1
Visomax Coating GmbH
- Sonnenstrasse 55 - D-97225 Zellingen
Note
Observe that self-adhering polishing pads are attached concentrically on the support disc.
Remove dirt and dust from the support disc before putting on a new polishing pad, e.g.
with a brush.
