Fon 0 93 64/81 76 00 - Fax 0 93 64/81 76 029 - [email protected] - www.visomax.de
Careful handling when using compressed air tools
]
Use clamping devices or a vice to hold and support the workpiece. If you hold the workpiece
with your hand or press it against your body, you cannot securely operate the compressed
air tool.
]
Do not overload the compressed air tool. Use the intended compressed air tool for your
work. The right compressed air tool will enable you to work better and more safely in the
indicated power range.
]
Do not use any compressed air tools with a defective on/off switch. A compressed air tool
that can no longer be switched on or off is dangerous and must be repaired.
]
Interrupt the air supply before making any settings on the device, replacing accessories or at
extended non-use. This preventive measure prevents inadvertent start-up of the
compressed air tool.
]
Keep unused compressed air tools out of the reach of children. Do not let persons use the
compressed air tool who are not familiar with it or who have not read these instructions.
Compressed air tools are dangerous when used by inexperienced persons.
]
Care for the compressed air tool diligently. Check if moving device parts work properly and
are not caught or if parts are broken or so damaged that the function of the compressed air
tool is impaired. Have damaged parts repaired before use of the compressed air tool. Many
accidents have their cause in badly serviced compressed air tools.
]
Use compressed air tools, accessories, usage tools, etc., according to these instruction.
Consider the working conditions and the work to be performed in this. This reduces dust
development, vibrations and noise development where possible.
]
The compressed air tool should only be set up, adjusted or used by qualified and trained
operators.
]
The compressed air tool must not be used. Changes may reduce the effectiveness of the
safety measures and increase the risks for the operator.
]
Have your compressed air tool only repaired by qualified specialists and only with genuine
spare parts. This ensures that the safety of the compressed air tool is retained.
Visomax Coating GmbH
- Sonnenstrasse 55 - D-97225 Zellingen
7
