Safety Information
Warning! This product is not for household use.
Read this manual before installing and operating the Labarazzi. Follow the safety
warnings listed below and study all the cautions in the manual. If the device is in any
way damaged, defective, wet, or show signs of overheating, disconnect from the
mains and PC and contact Viso Systems Service for assistance. Do not install or use
the device outdoors. Do not spray with or immerse in water or any other liquid. Do
not remove any covers or attempt to repair the controller or the power supply. Refer
any service to Viso Systems.
Disposing of this Product
Viso Systems products are supplied in compliance with Directive 2002/96/EC of the
European Parliament and of the Council of the European Union on WEEE (Waste
Electrical and Electronic Equipment), as amended by Directive 2003/108/EC, where
applicable. Help preserve the environment! Ensure that this product is recycled at
the end of its lifetime. Your supplier can give details of local arrangements for the
disposal of Viso Systems products.
Introduction
About Labarazzi
Th
e special Viso accessory “
Lab
arazzi”
a light source with selectable modulated light
waveforms of different modulation levels and shapes to emulate flicker and
stroboscopic effect having various visibility and perception properties that can be
used for demonstrations and test purposes of TLAs (temporary light artifacts).
Labarazzi works both as a stand-alone unit and connection with Viso Light Inspector
software, that can be downloaded from
The Labarazzi light source has several applications:
•
In research projects investigating TLA and human responses
•
For TLA tester calibration
•
For demonstration of flickering light
–
in education and sales
•
For test of (video-) cameras an compability with flickering light sources,
e.g. in TV
About this document
These guidelines describe the installation process of the Labarazzi and how to use it
with any of Viso Systems’ photogoniometers.
© 2021 Viso Systems ApS, Denmark
All rights reserved. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from Viso Systems ApS, Denmark. Information subject to change
without notice. Viso Systems ApS and all affiliated companies disclaim liability for any injury,
damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by
the use of, inability to use or reliance on the information contained in this manual.
