Labarazzi Installation Procedure
▪
Connect the power cable to the Labarazzi and mains power
(85-264 VAC, 40 W).
▪
Turn on the Labarazzi with on/off switch next to the power plug.
For integration with Viso software (and for firmware updates):
▪
Connection to PC with USB cable, and install Light Inspector software from
https://www.visosystems.com/download-light-inspector/
(software development finalised 2021/11)
When using the Labarazzi to feed a control signal to other devices
▪
Connect to other devices with Sync cable BNC (not included).
Put the Labarazzi
▪
on the desk lying down
–
light source facing backwards e.g., on a wall.
▪
on the desk standing up
–
light source facing downwards on the table.
