Viso Systems VISO SYSTEMS Labarazzi, User Manual

Page: 10 / 13

▪
Custom Signals – allows you to work with custom signals designed in Viso
Light Inspector, see page 11.
▪
Signal Generator – allows you to make a custom signal directly on the unit
(stand-alone)
▪
LED – turns the built LED on/off
▪
BNC Out – turns the external signal to the SYNC port ON/OFF
Signal Presets
The Labazzi includes 26 signal presets. Turn button right and left to pick signal. Press
selector to select and start.
The bottom of the display shows three cycles of the selected signal.
List of selectable signals:
Waveform Frequency
Percent
Flicker
Flicker
Index
Duty
Cycle
PstLM SVM
Hz % %
WF1 Square 30 50 0,25 50 63,21 0,91
WF2 Square 100 50 0,25 50 0,36 2,48
WF3 Square 15 5 0,30 50 11,83 0,06
WF4 Square 50 5 0,03 50 0,53 0,19
WF5 Square 60 100 0,50 50 3,27 4,77
WF6 Square 60 15 0,07 50 0,49 0,72
WF7 Square 65 100 0,50 50 1,88 5,05
WF8 DC None 0 0,00 None 0,00 0,00
WF9 Saw 50 100 0,25 50 5,27 1,97
WF10 Sine 50 5 0,25 50 0,41 0,15
WF11 Square 50 100 0,02 30 0,41 0,15
WF12 Square 50 100 0,70 95 14,35 5,48
WF13 Square 100 100 0,50 50 0,72 4,96
WF14 Square 400 100 0,50 50 0,00 2,06
WF15 Square 100 25 0,13 50 0,18 1,24
WF16 Square 10 0,33 0,00 50 0,99 0,00
WF17 Rect. sine 100 100 0,21 50 0,00 1,83
WF18 Sine 100 100 0,32 50 0,08 3,89
WF19 Square 100 100 0,70 30 2,50 6,75
WF20 Square 100 100 0,05 95 0,89 0,44
WF21 Sine 100 35 0,11 50 0,03 1,36

WF1

PstLM 63.21 Freq 30.00 Hz
SVM 0.91 Percent Flicker 50%
FI 0.25 Duty Cycle 50.00%