Vislink AJ-RC10 User Manual Download Page 36

Page: 36 / 70

User Manual Focal Point

Camera Control Interface Unit - CRIU-ASSY-7XXX

Issue No: M

Page: 28

Ref: FOCL-ASUM-8xxx

Set the Configuration output to Ethernet, using the following menus:



Configuration > Output: Ethernet

Set the Ethernet Port as required, using the following menus:



Ethernet Port > Configuration

Set the Ethernet Receive Port number to match the Transmitter(s) Interface Unit
Transmit Setup Port number, using the following menus:



Ethernet Port > Receive Setup > Port: XXXXX

Set the Destination IP and Port number as the Data Transmitter(s) Interface Unit,
using the following menus:



Ethernet Port > Transmit Setup:



Dest. IP: XXX.XXX.XXX.XXX



Port: XXX.XXX.XXX.XXX

The Unit Warning message displays No Eth Comms from Remote Unit until connection is
established.

When a controller sends data, the relevant OCP Channels Blue Tx Data indicator flashes in
both Camera Control Interface Units.

A maximum of six OCP Channels is available (this applies to a fully licensed unit).

Tally on/off control is accessible at either Camera Control Interface Unit.

Configure Tall On/Off by setting the Tally Enabled option in the OCP Channel menu. See
Section 3.4.13.3.

Tally Enabled: Yes



Use the Red/Green Wet/Dry 25-way D-Type connections into the Camera Control
Interface unit with the OCP input configuration.

Tally Enabled: No



Use the Red/Green Wet/Dry 25-way D-Type connections into the Camera Control
Interface unit with the Ethernet input configuration

NOTE: Camera Return Data is not available using this configuration.

The Grass Valley Camera and OCP require the latest software installed, with the Serial Basic
(Ser_Basic) functionality.

Set the Grass Valley OCP400 to the following required settings:



Setup Menu> OCP> Conn.Mode> Ser_Basic



Setup Menu> OCP> Ser.Level> RS-422

Summary of Contents for AJ-RC10





























































Search results

Summary of Contents for AJ-RC10

Reviews:

Related manuals for AJ-RC10

Brands by name

Popular brands

Vislink AJ-RC10, User Manual

Search results

Summary of Contents for AJ-RC10

Reviews:

Related manuals for AJ-RC10

Brands by name

Popular brands