C
HECKING
THE
H
ARDWARE
AND
L
AMP
S
ETTINGS
69
Scanning from TWAIN
You can scan from any TWAIN scanning application instead of scanning
from the OneTouch button on your scanner or the OneTouch button
panel. Please refer to the software user’s guide, for the application that you
are using, for steps to open the TWAIN interface. You can also access the
TWAIN interface when you’re scanning from the OneTouch software, as
described in this section.
A Note About Your Scanner and the TWAIN standard:
TWAIN is a
widely recognized standard that software applications use to receive images
from scanners and digital cameras. The TWAIN interface is often the same
regardless of the software you use to open it. However, some applications
do have their own TWAIN interface. You can use the instructions in this
User’s Guide
for scanning with your Visioneer Strobe XP 450 scanner. If
you access the TWAIN interface from an application and do not see the
interface described in this section, you will need to refer to that
application’s user guide.
