VISION X
MANUFACTURER RECOMMENDATION
For those unfamiliar with electrical wiring on vehicles, Vision X recommends
that all LED Lighting products are professionally installed
.
WIRING INSTALLATION
1. Disconnect your battery before instal.
2. Find the factory fog Light harness or an existing power source, to tap into.
3. Connect the positive (red) Pigtail wire to the positive wire of your previous
wiring harness. Repeat this step for the negative Pigtail (black) wire as
well.
4. Once the Pigtail is connected to the factory wiring harness, its ready to
plug into the LED Light for use.
-
+
-
2
+
PIGTAIL
1
2
3
COMPONENTS KEY
1) LED Light
2) Pigtail
3) Wire to Factory Fog Light
WARNING: Bolts, Nuts, and Washers are Stainless Steel. DO NOT USE
Pneumatic or Electric Tools to Tighten and Loosen. The Hardware Will
Permanently Lock Together.
