DURA 4
MOUNTING INSTALLATION
1. First, place the Light on the location where it will be mounted. Remember
that it must be within reach of the harness.
2. Next determine where the (M8) bolt will be placed, and mark where the
bolt locations will be.
3. Drill a hole for the (M8) bolt.
4. Place the Light over the hole, and slide the bolt through. Washer is then
applied on the other end of the drilled hole followed by the bolt.
5. Tighten nut to desired tightness.
MOUNTING KEY
Part (M1) Bolt [M8]
Mounting Bracket
Part (M2) Washer
Part (M3) Nut [M8]
(Mounting Bracket)
(M1)
(M2)
(M3)
TIP:
For complete application guide see Website