6.2
Video Monitor
Connect Video cable with BNC-male connector to the monitor.
Impedance alliance in the system connection.
Make sure to connect the cable with the power off. Please locate the impedance switch
of each equipment as instructed. Locate the switch to Hi-z position for the interim equipment
.
Locate the switch to 75 for the last equipment.
6.3
Power
Waterproof Cable Option
* #"&
! ##
Before sending the camera out for repair, check the items below. If the camera persists after
checking these items, contact your service center.
),
Please make sure to use a UL/CE approved
and 12VDC regulated power supply.