vicosys
®
5400
Commissioning
42
999.994.729.10-en-2.3
© Vision & Control GmbH 2017
6.3 Connecting
NOTICE
Installation and connection operations may only be performed in the off and
de-energised state.
NOTICE
Cable damage
•
Comply with the specified minimum bending radius.
•
Cables must generally be mounted with a strain relief clamp.
•
Use cables corresponding to the specification (see data sheet).
6.3.1 Connect the Ethernet interfaces
Connect the device with the LAN via Ethernet cable.
Use the Ethernet interface LAN 1 for process communication and
parametrisation.
Use the Ethernet interface LAN 2 for direct connection to a PC.
6.3.2 Connect the RS232 interface
The components required for connecting are available as accessories.
For serial communication, connect the device to the process environment using
an RS232 cable.
Use the interface Serial 1 for process communication and parametrisation.
Use the interface Serial 2 to operate the device with the Key-Pad.
